Solar PV

Solar PV modules, inverters and trackers for the GCC

Tier-1 monocrystalline modules, grid-tied and hybrid inverters, and mounting systems selected for high irradiance, 50 °C summers and dust, supplied from Dubai for rooftop, carport and utility-scale projects across the GCC and MENA.

Request a quote Talk on WhatsApp

Cell technology: TOPCon · HJT
System voltage: Up to 1,500 V DC
Standards: Modules tested to IEC 61215 / 61730

Rows of solar panels on a warehouse rooftop under a low amber sun

What we supply

Solar PV product groups

Wholesale supply in project and container volumes. Tell us your specification and we source to it.

Tier-1 monocrystalline modules

Bifacial, TOPCon and HJT modules from Tier-1 manufacturers for rooftop, carport and ground-mount arrays.

n-type cells with low power temperature coefficients: about −0.24 to −0.27 %/°C for HJT and −0.29 to −0.32 %/°C for TOPCon
Bifacial glass-glass formats that add rear-side yield over bright desert ground
Certified to IEC 61215 and IEC 61730, with IEC 61701 salt-mist and IEC 62716 ammonia tests where the site calls for them
Utility-class ratings above 600 W, plus lighter formats for rooftops and carports
Anti-reflective glass coatings suited to dusty, high-irradiance sites

Quote this

Inverters: string, central and hybrid

Grid-tied and hybrid conversion from villa rooftops to multi-megawatt plants.

String inverters from single-phase residential sizes to 300 kW-class utility units
Central inverter skids for large ground-mount plants at 1,500 V DC
Hybrid inverters with battery ports for self-consumption and backup
IEC 62109-1/2 safety certification and anti-islanding protection, as DEWA equipment eligibility requires
Published derating curves checked against 45–50 °C site ambient

Quote this

Mounting structures and single-axis trackers

Rooftop, carport and ground-mount structures, plus single-axis trackers for utility plants.

Hot-dip galvanised steel and aluminium, with coatings matched to coastal or inland corrosivity
Single-axis trackers with backtracking and high-wind stow control
Sealed drives and controllers rated for dust and sand ingress
Compatible with robotic dry-cleaning systems that avoid water use
Ballasted and penetrating rooftop systems and elevated carport frames

Quote this

Applications

Where it is used

Commercial and industrial rooftops

Warehouses, factories and malls use large, flat roofs to cut daytime grid imports. Systems are sized to the site load profile and roof capacity. In Dubai they connect under DEWA’s Shams Dubai net-metering programme, and in Abu Dhabi under the small-scale solar regulations of the Department of Energy with ADDC or AADC.

Utility-scale ground mount

Multi-megawatt plants combine bifacial modules, single-axis trackers and 1,500 V central or string inverters to lower the cost of each kilowatt-hour. We can supply full bills of materials in container volumes, and manufacturer test reports and datasheets are available on request for EPC contractors, lenders and owner’s engineers.

Carports and shading

Solar carports shade vehicles in summer heat and generate power at the same time. Elevated steel frames carry glass-glass or bifacial modules, and they can host EV chargers underneath. They suit malls, hospitals, schools and office parks that have large, open parking areas but limited roof space.

Villas, farms and remote sites

Residential and agricultural systems pair modules with hybrid inverters and batteries for backup power or fully off-grid supply. For villas in Dubai, equipment must appear on DEWA’s eligible equipment list and be installed by a DEWA-enrolled contractor. Our partners handle both requirements for you.

Why Synapse Horizon

Supplied by us, delivered with our partners

Tier-1 sourcing

Modules, inverters and trackers sourced from Tier-1 manufacturers and authorised channels, with the manufacturer warranty applying.

Documentation and certification support

IEC 61215/61730 module certificates, IEC 62109 inverter reports and datasheets organised for DEWA and Abu Dhabi submissions.

Logistics coordinated from Dubai

Shipments can be consolidated in Dubai and delivered by road or sea across the UAE, Saudi Arabia, Oman, Qatar, Kuwait and Bahrain, and onward to wider MENA.

Partner engineering and installation

Our engineering, EPC and installation partners handle design, utility submissions, installation and commissioning, so you get one accountable path from quote to energisation.

FAQ

Solar PV questions

What does “Tier-1” mean for solar modules?

Tier-1 describes manufacturers whose modules have been financed by several independent banks on utility-scale projects. It is a bankability signal, not a quality certificate. It is worth combining it with checks that matter on site: IEC 61215 and IEC 61730 certificates, manufacturer test data, warranty terms, and the manufacturer’s track record in hot, dusty climates.

Are your products eligible for DEWA Shams Dubai?

DEWA keeps a list of eligible PV modules, inverters and interface protection. Modules need IEC 61215, IEC 61730 and IEC 61701 certificates from accredited labs, and inverters need IEC 62109 or UL 1741 safety compliance. We can confirm DEWA eligibility for your project, and our partners can handle the DEWA submission.

Is bifacial worth it in the desert?

Usually, yes. Bright sand and gravel reflect light onto the rear of the module, which adds energy yield. The gain depends on ground albedo, mounting height and row spacing, and it is highest on trackers. Your engineer should model bifacial gain with site albedo data, not rely on a datasheet headline figure. Read our TOPCon vs HJT bifacial guide for the UAE.

How do dust and heat affect output?

Dust on the glass can cut output noticeably between cleanings, so plan a cleaning schedule or use robotic dry cleaning. Heat lowers module voltage, which is why a low temperature coefficient matters. Inverters also derate at high ambient temperature, so check the derating curve and install them in shade with good airflow.

Do you install the system as well?

We are a wholesale supplier. Design, installation and commissioning are carried out by our engineering and installation partners, who are enrolled with the relevant utility where that is required. You can buy hardware only for your own EPC team, or ask us for a supply-and-install proposal delivered through a partner.

Request a quote

Request a quote for Solar PV

Share quantities, specifications, delivery location and timeline. No obligation, and we reply within one business day.